Direct Steam Injection Solutions: BioFuels & Renewable Energy Market
ProSonix Direct steam injection heating for Jet Cooker, Biomass Pretreatment, Biogas Production, Cellulosic Pretreatment, Fuel Ethanol, Jet Cooker, Starch Cooker, Renewable Fuels, Starch Liquefaction, Slurry Heating, Corn Wet Milling, & Water Heating Applications.
Contact the biofuel steam injection heating system suppliers at Pro-Sonix today for more information about the applications of our tank mounted and inline heaters.
Ethanol Production - Starch Jet Cooker
The ProSonix OptiShear Jet Cooker is well suited for optimizing starch cooking. The jet cooker mixing action assures complete hydrolization of the slurry prior to starch liquefaction for a more uniform cook.
Biomass & Cellulosic Pretreatment - Ethanol
Fibrous slurries present a number of challenges from a process heating and fluid handling standpoint. The ProSonix I-Series Inline heater is well suited for heating of handling fibrous and can be arranged in single or multi-stage configurations. Efficient heating of biomass & cellulosic slurries provide a uniform heat transfer challenging pretreatment applications.
Corn Wet Milling Applications
The ProSonix OptiShear Jet Cooker assures radial slurry flow providing a more complete cook of the starch slurry for corn wet mill processing.
Biogas Production - Anaerobic Digestion
In renewable fuels processing, the ProSonix Inline Direct Steam Injection heater is designed to handle high viscosity and difficult to pump sludges, manures, and high viscosity slurries. Precise temperature control and a low pressure drop across the heater allows for easy integration with your pumping system and anaerobic digester.
Fibrous Stock Heating
ProSonix Direct Steam Injection heaters can be used for renewable fuels such biomass pretreatment & cellulosic pretreatment. Water heating can be preformed to o heat the fibrous stock. The fibrous slurry can then be heated via the PSX I-Series Inline Heater prior to pretreatment. Accurate temperature control and unlimited supply of hot water on demand makes the slurry pre-heating fast and easy.
Energy Savings - Vent & Waste Steam Recovery
ProSonix J-Series Jet Sparger can be used to capture vent or waste steam that is typically released to atmosphere, and inject back into process water system or water tanks for energy savings.
On Demand Hot Water
ProSonix will heat water instantly and on demand to any desired temperature before it enters a batch process, reducing the cycle time and increasing productivity. Inline water heating or Jet Sparger designs are available.
Jet Sparger Optimization - Tank Heating
Tank heating with spargers or eductors can lead to steam hammer problems which can damage tank walls and welds. Proper tank heating with a J-Series Jet Sparger utilizes high velocity steam for rapid mixing and condensation of the steam.
