Process Heating Manufacturer for Mining & Mineral Processing
Direct Steam Injection Solutions for Tank heating, Brackish Water, and Mineral Leach Slurry Heating
ProSonix Direct Steam Injection Heating for Alumina Slurry, Bauxite Slurry, Bitumen Froth Treatment, Brackish Water, Mineral Leach Slurry Heating, Feedwater Heater, Evaporative Flash Recovery, Jet Sparger, Naphtha, Oil Sands, Slurry Heating, Steam Assisted Gravity Drainage (SAGD), Tailings Transport, Tank Heating, Steam Injection Valves, & Water Heating Applications.
Contact the mining and mineral processing direct steam injection system manufacturers today for more information on the many applications and uses of the superb products from Pro-Sonix.
ProSonix direct steam injection heating can be used for a variety of difficult to handle mineral slurries such Alumina Slurry, Brackish Water, Bauxite Slurry, Oil Sands processing, Bitumen processing, and Leaching. The PSX Heater is available in a variety of alloys to address corrosion issues and hardened wear resistant coatings can be applied to address erosion.
Check out an example of how direct steam injection for mineral leach slurry heating will benefit your company and improve your production process.
Energy Savings - Vent & Waste Steam Recovery
ProSonix J-Series Jet Sparger can be used to capture vent or waste steam that is typically released to atmosphere, and inject back into process water system or water tanks for energy savings.
Evaporative Flash Recovery
The ProSonix steam injection heater’s ability to deliver instant, single pass heat up allows for recovery of costly solvents and naphtha from mine slurries, sour water, bitumen froth treatment, and other slurry heating applications. Direct steam injection heating allows for flash recovery and separation in Oil Sands and Tar Sands processing.
Boiler Feedwater Heater
Direct steam injection heating for boiler feedwater can reduce energy costs and improve the thermal efficiency of the boiler. The PSX Heater eliminates mineral & scale build-up and Pugging/Fouling associated with conventional feedwater heaters.
Lime Slaker Heating
A number of industries use hydrated lime addition for their processes. Hydrated lime (or calcium hydroxide, or slaked lime) is usually a dry powder resulting from the controlled slaking of quicklime with water. The exothermic or released heat of reaction is captured and used to evaporate the excess slaking water. High calcium quicklime readily reacts with water to form hydrated lime.
Aggressive Fluid Heating
Heating water and challenging fluids such as alumina slurry, bauxite slurry, brackish water & abrasive slurry such as oil sands/bitumen froth, and tailings transport presents unique challenges for traditional heating methods. SAGD applications require large volumes of continuous heating for long periods of times. The ProSonix I-Series Inline heater can address scale & mineral build-up issues and is designed for demanding continuous process heating applications.
Brackish Water Heating
The ProSonix Steam Injection heater is well suited for brackish water and other fluids with high dissolved mineral contant. The unique inline heater design has a very low pressure drop, typically 1-2 psig, minimizing flow disruptions which lead to precipitate fallingout. The radial multi-port steam jet diffuser operates under sonic velocity steam injection which produces a self cleaning action. With no hot surfaces and velocity steam flow, mineral & scale build-up issues are eliminated.
Avoiding Transport Line Freeze-up
The ProSonix J-Series Jet Sparger is an economical way of adding heat to tailings transport and slurry lines to avoid freeze problems during colder winter months and during shut down or maintenance periods. The J-Series Jet Sparger can be installed on large diameter pipes (>18") without expensive reconfiguration of piping and steam lines.
ProSonix direct steam injection heating is a good choice for a variety of water heating applications because the PSX Heater has a high turndown on both steam and liquid. In applications such as SAGD, large volumes of water are required at high temperatures. ProSonix direct steam injection heaters are available in a variety of designs to address most needs.
Jet Sparger Optimization for Tank Heating
Tank heating with spargers or eductors can lead to steam hammer problems which can damage tank walls and welds. Proper tank heating with a Jet Sparger utilizes high velocity steam for rapid mixing and condensation of the steam. The ProSonix J-Series Jet Sparger is well suited for a variety of tank heating needs.
A leading Global Petroleum company looked to upgrade their Brackish water heating system.
A leading steel mill needed to upgrade their cooling water tank used to supply their hood cooling system.